AI导哈

设计与多媒体

jlcpcb

aklofas/kicad-happy

JLCPCB PCB fabrication and assembly — BOM/CPL generation, basic vs extended parts, assembly constraints, design rules, ordering workflow. Use with KiCad for JLCPCB manufacturing. Use this skill when the user mentions JLCPCB, wants to order PCBs or assembled boards, needs prototype bare PCBs and stencils, wants to know JLCPCB design rules and capabilities, or is asking about PCB manufacturing costs or turnaround times. For gerber/CPL export, stencil ordering, and BOM management, see the `bom` skill.

  • 796 次安装
  • 1500 星标
  • 收录于

安装命令

npx skills add https://github.com/aklofas/kicad-happy --skill jlcpcb

SKILL.md

JLCPCB — PCB Fabrication & Assembly

JLCPCB is a PCB fabrication and assembly service based in Shenzhen, China. It is a sister company to LCSC Electronics (common ownership) — they share the same parts library.

Typical usage: Order bare prototype PCBs + framed stencil from JLCPCB during prototyping (parts sourced separately from DigiKey/Mouser, hand-assembled in lab). For production runs (100s qty), order fully assembled boards from JLCPCB using LCSC parts. PCBWay is an alternative assembler. For component searching, see the lcsc skill. For BOM management, gerber/CPL export, and stencil ordering, see the bom skill.

Related Skills

Skill Purpose
kicad Read/analyze KiCad project files, DFM scoring against JLCPCB capabilities
bom BOM management, gerber/CPL export, stencil ordering
digikey Search DigiKey (prototype sourcing, primary — also preferred for datasheet downloads via API)
mouser Search Mouser (prototype sourcing, secondary)
lcsc Search LCSC (production sourcing — JLCPCB uses LCSC parts library)
pcbway Alternative PCB fabrication & assembly
emc EMC pre-compliance risk analysis — run before fab to catch EMC issues
spice SPICE simulation — verify analog subcircuits before committing to fab

JLCPCB — PCB Fabrication & Assembly

JLCPCB is a PCB fabrication and assembly service based in Shenzhen, China. It is a sister company to LCSC Electronics (common ownership) — they share the same parts library.

Typical usage: Order bare prototype PCBs + framed stencil from JLCPCB during prototyping (parts sourced separately from DigiKey/Mouser, hand-assembled in lab). For production runs (100s qty), order fully assembled boards from JLCPCB using LCSC parts. PCBWay is an alternative assembler. For component searching, see the lcsc skill. For BOM management, gerber/CPL export, and stencil ordering, see the bom skill.

Related Skills

Skill Purpose
kicad Read/analyze KiCad project files, DFM scoring against JLCPCB capabilities
bom BOM management, gerber/CPL export, stencil ordering
digikey Search DigiKey (prototype sourcing, primary — also preferred for datasheet downloads via API)
mouser Search Mouser (prototype sourcing, secondary)
lcsc Search LCSC (production sourcing — JLCPCB uses LCSC parts library)
pcbway Alternative PCB fabrication & assembly
emc EMC pre-compliance risk analysis — run before fab to catch EMC issues
spice SPICE simulation — verify analog subcircuits before committing to fab

相关 Skills

kicadaklofas/kicad-happyAnalyze KiCad projects and PDF schematics: schematics, PCB layouts, Gerbers, footprints, symbols, netlists, and design rules. Reviews designs for bugs, traces nets, cross-references schematic to PCB, extracts BOM data, checks DRC/ERC, DFM, power trees, and regulator circuits. Every finding carries a confidence label and evidence source with trust_summary rollup. Analyzes PDF schematics from dev boards, reference designs, eval kits, and datasheets. Supports KiCad 5–10. Use whenever the user mentions .kicad_sch, .kicad_pcb, .kicad_pro, PCB design review, schematic analysis, PDF schematics, reference designs, Gerber files, DRC/ERC, netlist issues, BOM extraction, signal tracing, power budget, DFM, or wants to understand, debug, compare, or review any hardware design. Also for "check my board", "review before fab", "what's wrong with my schematic", "is this ready to order", "check my power supply", "verify this circuit", OSHWA certification readiness, or any electronics/PCB design question.设计与多媒体1089bomaklofas/kicad-happyBOM (Bill of Materials) management for electronics projects — the workflow skill that coordinates DigiKey, Mouser, LCSC, element14, JLCPCB, PCBWay, and KiCad skills around a unified BOM lifecycle. Create, update, and maintain BOMs with part numbers, costs, quantities stored as KiCad symbol properties. ALWAYS trigger this skill for any task involving component sourcing, pricing, ordering, distributor searches, BOM export, or fabrication preparation — even if the user names a specific distributor or fab house (e.g. "search DigiKey for...", "generate JLCPCB BOM", "order from Mouser"). This skill analyzes the schematic for sourcing gaps, recommends which distributor/fab skills to call for each gap, and writes results back as symbol properties — the agent (or user) performs the actual searches via the called skills. Also trigger on phrases like "what parts do I need", "order components", "how much will this cost", "export for JLCPCB", "find parts for this board", "compare pricing", or "check stock".前端开发716lcscaklofas/kicad-happySearch LCSC Electronics for electronic components — find parts by LCSC number (Cxxxxx) or MPN, check stock/pricing, download datasheets, analyze specifications. Sister company to JLCPCB, same parts library. Sync and maintain a local datasheets directory for a KiCad project, or use batch MPN-list seeding (`--mpn-list`) for bulk workflows without a project. No API key needed — uses the free jlcsearch community API. Use this skill when the user mentions LCSC, JLCPCB parts library, JLCPCB assembly parts, production sourcing, Cxxxxx part numbers, needs to find LCSC equivalents for parts, is preparing a BOM for JLCPCB assembly, or wants to download datasheets and LCSC is available. For package cross-reference tables and BOM workflow, see the `bom` skill.智能体工作流659spiceaklofas/kicad-happyRun automatic SPICE simulations on subcircuits detected from KiCad schematic analysis — validates filter frequencies, divider ratios, opamp gains, LC resonance, and crystal load capacitance. Supports ngspice, LTspice, and Xyce (auto-detected). Generates testbenches, runs batch mode, produces structured pass/warn/fail report. Use when the user asks to simulate, verify, or validate any analog subcircuit — RC filters, LC filters, voltage dividers, opamp circuits, crystal oscillators. Also for "simulate my circuit", "run spice", "verify with simulation", "check my filter cutoff", "does this divider give the right voltage", "what's the bandwidth of this opamp stage". Consider suggesting simulation during design reviews when the schematic analyzer reports simulatable subcircuits and a SPICE simulator is available.设计与多媒体640emcaklofas/kicad-happyEMC pre-compliance risk analysis for KiCad PCB designs — 18 check categories, 44 rule IDs covering ground planes, decoupling, I/O filtering, switching harmonics, clock routing, differential pair skew, board edge radiation, PDN impedance, return paths, crosstalk, ESD protection, shielding, and magnetic leakage from switching inductors. Produces severity-ranked risk report with pre-compliance test plan. Supports FCC Part 15, CISPR 32, CISPR 25 (automotive), MIL-STD-461G. SPICE-enhanced when available. Use when the user asks about EMC, EMI, radiated/conducted emissions, FCC compliance, CE marking, CISPR, ground plane issues, decoupling strategy, clock routing EMC, switching noise, differential pair skew, or whether their board will pass EMC testing. Also for "will this pass FCC?", "check my EMC", "is my ground plane okay?", "check my decoupling", or "generate an EMC test plan".测试与安全630datasheetsaklofas/kicad-happyExtract structured specifications from electronic component datasheet PDFs — pinouts, electrical characteristics, peripherals, topology, and features. Cache extractions per project for consumption by schematic and PCB analyzers. Primary consumer infrastructure for `kicad`, `emc`, `spice`, and `thermal` analyzers. Use this skill whenever the user asks to extract, verify, or read specs from a component datasheet; when analyzers need verified IC knowledge (EN pin thresholds, PG presence, USB peripheral speed); or when a review mentions datasheet coverage, extraction quality, or per-MPN specifications. Also triggers on "extract this datasheet", "what are the specs for MPN X", "verify datasheet extraction", or "check pin functions for part Y".前端开发616